China Hot selling R3 R3s R4 R5 Marine Offshore Mooring Anchor Chain c2060h roller chain

Product Description

Product Description

1. Stud Link Anchor Chain Cable Introduction:
Stud Link Anchor Chain is widely used on Floating Equipment, Ships, Oil Rigs and Mooring Buoys.
We supply wide range of sizes and grades:
Grade U2 / U3 from 12.5mm to 162mm; Grade ORQ / R3 /R3S / R4 from 58mm to 162mm
Can be supplied with CCS BV LR NK KR ABS DNV-GL RMRS IRS certificate etc.
Our chain can meet requirement of ISO1704, GB/T 549, JIS F3303, Gost 228, IACS, OCIMF, API and other international regulations.

2. Our Advantage:
Manufacturing Advantage:
1.We have more than 20 years experience in anchor chain production.
2.We keep some in stock can delivery in 1~5 days to meet urgent requirement.
3.Our factory is ISO9001 approval, OSHMS18001 approval, ISO14001 approval, API approval and type approval by all IACS members.
4.Advantage manufacturing facilities:
Advanced program-controlled chain production line; Automatic heat treatment machine; Automatic shot blasting machine.

5.Quality Control:Manufacturing process quality control from raw material to final product.
Whole set drawing approved by all IACS members; Material Fatigue Test on request; Stress Analysis on request; Stress actual test on quest.
Magnetic power testing, ultrasonic testing, and fluorescent penetrant inspection.
Load test machine up to 4000Ton.
 

3. About Our factory:

Our main products:
Anchor chain and accessories (Stud Link Anchor Chain, Studless Anchor Chain, all types of shackles and connectors)
Mooring chain and accessories (Stud Link Mooring Chain, Studless Mooring Chain, Grade ORQ, R3, R3S, R4 and R5)
Deck outfitting (Chain Stopper, Chock, Bollard and Fairlead)
Marine anchors (Oridinary Anchor such as Hall, Spek and Stockless Anchor, High Holding Power Anchor such as AC-14, Danforth and Pool Achor)
Offshore and agricultural anchors (Flipper Delta, Stevpris MK5, MK6 and Stevshark)
Offshore mooring buoy (Steel Structured, Foam Filled and Navigation Buoys)

Products with high quality and service of professionality is what we pursue.
Please contact us if you have any queries, we will do our best to meet your requirements.

3. Product Dimensions:

4. Technical Data
Proof Load and Breaking Load of Stud Link Anchor Chain:

Nominal Diameter (mm) Proof Test Load (kN) Breaking Test Load (kN) Theoretical Weight (kg/27.5m)
Grade 2 Grade 3 Grade 2 Grade 3
17.5 127 179 179 256 194.0
19 150 211 211 301 236.0
20.5 175 244 244 349 269.0
22 200 280 280 401 322.0
24 237 332 332 476 370.0
26 278 389 389 556 431.0
28 321 449 449 642 496.0
30 368 514 514 735 564.0
32 417 583 583 833 635.0
34 468 655 655 937 712.0
36 523 732 732 1050 800.0
38 581 812 812 1160 887.0
40 640 896 896 1280 1032.0
42 703 981 981 1400 1084.0
44 769 1080 1080 1540 1197.0
46 837 1170 1170 1680 1310.0
48 908 1270 1270 1810 1438.0
50 981 1370 1370 1960 1546.0
52 1060 1480 1480 2110 1661.0
54 1140 1590 1590 2270 1791.0
56 1220 1710 1710 2430 1926.0
58 1290 1810 1810 2600 2086.0
60 1380 1940 1940 2770 2249.0
62 1470 2060 2060 2940 2361.0
64 1560 2190 2190 3130 2516.0
66 1660 2310 2312 3300 2676.0
68 1750 2450 2450 3500 2885.0
70 1840 2580 2580 3690 3571.0
73 1990 2790 2790 3990 3274.0
76 2150 3571 3571 4300 3548.0
78 2260 3160 3160 4500 3737.0
81 2410 3380 3380 4820 4030.0
84 2580 3610 3610 5160 4334.0
87 2750 3850 3850 5500 4650.0
90 2920 4090 4090 5840 4976.0
92 3040 4260 4260 6080 5119.0
95 3230 4510 4510 6440 5544.0
97 3340 4680 4680 6690 5780.0
100 3530 4940 4940 7060 6143.0
102 3660 5120 5120 7320 6398.0
105 3850 5390 5390 7700 6773.0
107 3980 5570 5570 7960 7033.0
111 4250 5940 5940 8480 7569.0
114 4440 6230 6230 8890 7983.0
117 4650 6510 6510 9300 8409.0
120 4850 6810 6810 9720 8863.0
122 5000 7000 7000 9990 9143.0
124 5140 7200 7200 15710 9598.0
127 5350 7490 7490 1571 9908.0

Theoretical weight of Anchor Chain Accessories:

Nominal Diameter (mm) Weight (kg) No.of Links per 27.5m
KS JS ES SP C EL E
20.5 1.0 2.0 3.0 8.1 0.8 1.1 1.2 331
22 2.0 3.0 4.0 8.6 1.0 1.4 1.5 307
24 2.0 3.0 5.0 11.4 1.3 1.8 1.9 281
26 3.0 4.0 6.0 16.2 1.7 2.2 2.5 261
28 4.0 5.0 8.0 21.4 2.0 2.8 3.0 243
30 4.0 6.0 9.0 23.1 2.5 3.5 3.8 227
32 5.0 7.0 11.0 29.7 3.0 4.2 4.6 213
34 6.0 10.0 14.0 36.8 3.6 5.0 5.5 199
36 7.0 11.0 16.0 39.9 4.3 6.0 6.5 187
38 8.0 12.0 18.0 47.7 5.0 7.0 7.7 179
40 9.0 13.0 20.0 51.7 6.1 8.2 9.0 169
42 11.0 17.0 25.0 64.8 6.7 9.5 10.4 161
44 13.0 19.0 27.0 77.6 7.8 10.9 12.0 153
46 14.0 21.0 30.0 83.5 9.0 12.4 13.6 147
48 15.0 23.0 34.0 100.0 10.1 14.1 15.5 141
50 18.0 29.0 41.0 115.0 11.3 16.0 17.5 137
52 20.0 31.0 45.0 124.0 12.7 18.0 19.7 131
54 20.0 34.0 50.0 141.0 14.3 20.1 22.0 125
56 24.0 38.0 54.0 148.0 15.9 22.5 24.6 121
58 28.0 44.0 65.0 168.0 17.8 24.9 27.3 117
60 28.0 48.0 70.0 191.0 19.9 27.6 30.2 113
62 33.0 52.0 76.0 202.0 21.7 30.5 33.4 109
64 38.0 57.0 82.0 231.0 23.5 33.5 36.7 107
66 38.0 66.0 94.0 261.0 26.0 36.8 40.2 103
68 44.0 70.0 101.0 273.0 29.1 40.2 44.0 99
70 44.0 75.0 108.0 307.0 31.0 43.9 48.0 97
73 51.0 87.0 124.0 318.0 35.2 49.7 54.5 93
76 58.0 93.0 141.0 393.0 39.9 56.1 61.5 89
78 65.0 108.0 150.0 408.0 43.0 60.7 66.5 87
81 74.0 119.0 171.0 458.0 48.6 68.0 74.4 83
84 84.0 134.0 193.0 508.0 53.5 75.8 83.0 81
87 94.0 151.0 218.0 564.0 66.3 84.2 92.2 79
90 105.0 167.0 243.0 623.0 71.2 93.2 102.0 75
92 105.0 175.0 256.0 669.0 78.0 99.5 109.0 73
95 115.0 200.0 280.0 733.0 83.8 109.6 120.0 71
97 135.0 210.0 305.0 754.0 91.7 116.7 127.8 69
100 150.0 230.0 335.0 827.0 95.5 127.9 140.0 67
102 150.0 243.0 350.0 891.0 104.2 135.7 148.6 67
107 175.0 285.0 410.0 1042.0 111.6 148.0 162.0 63
111 200.0 305.0 415.0 1150.0 124.0 156.6 171.5 61
114 225.0 325.0 475.0 1239.0 135.3 174.9 191.5 59
117 225.0 345.0 505.0 1332.0 147.5 189.4 207.4 57
120 257.0 380.0 550.0 1465.0 155.5 204.8 224.2 57
122 315.0 420.0 600.0 1632.0 166.2 220.9 241.9 55
124 257.0 380.0 550.0 1465.0 174.5 249.7 273.4 55
127 315.0 420.0 600.0 1632.0 186.9 261.9 286.8 53

5. Product Photos:

6. Production And Inspection Procedure:

 

Thirty Party Certificate:
Lloyd’s Rigister of Shipping (LR)
American Bureau of Shipping (ABS)
Det Norske Veritas (DNV)
Germanischer Lloyd (GL)
Bureau Veritas (BV)
Korean Register of Shipping (KR)
Nippon Kaiji Kyokai (NK)
Registro Ltaliano Navale Group (RINA)
China Classification Society (CCS)
Russian Maritime Register of Shipping (RMRS)
Indian Register of Shipping (IRS)
Croatian Register of Shipping (CSR)
Due to limited space here, some photo is vague, you can contact us for clearer ones.

7. Our factory:

8. Exhibition:

9. Our package and shipping:
1). Gunny bag, inside PVC bag and outside gunny bag +pallet
2). Wooden case or pp ton woven bag
3). Others as customer required

10. Accessories:
Kenter shackle, end shackle, swivel forrunner, triplate, swivel shackle, mooring ring, LTM shackle, pear link, buoy shackle etc.

After-sales Service: One Year
Warranty: One Year
Application: Boat, Yacht, Mooring
Standard: Black Painted or Galvanized
Customized: Customized
Surface Treatment: Black Painted or Galvanized
Customization:
Available

|

Customized Request

chain

buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Hot selling R3 R3s R4 R5 Marine Offshore Mooring Anchor Chain   c2060h roller chainChina Hot selling R3 R3s R4 R5 Marine Offshore Mooring Anchor Chain   c2060h roller chain
editor by CX 2023-07-11

Recent Posts